Clock kit guide: 4 wooden clocks to build, from a wall clock to a cuckoo clock

Published (updated )

The finished Steampunk Wall Clock hanging on a pale brick wall in a workshop: a zodiac dial, gears, red wheels and Roman numerals, above a workbench with pliers and a small screwdriver.

Four wooden clocks to build yourself, an honest answer to the question of which one actually tells time, and the steps from the box to the wall.

You look at a clock differently once you've put it together yourself. You know where the movement hides, which gear went in first and why the hands line up so neatly. If you're looking for a clock kit to build your own, with no workshop and no clockmaking background, precut wood is the easiest way to get there.

Before you choose, ask yourself three questions: should it tell time, or be part of a scene? How many evenings do you have? And where will it live, on a wall or on a desk? Our mechanical models cover all three, and our wooden models offer more.

The short version

  • First kit: the Steampunk Wall Clock has 168 pieces, takes about 1.5 hours to build and shows the time and date.
  • For a desk: the Owl Pendulum Clock stands on its own and shows the month and day as well as the time.
  • For a long project: the Cuckoo Clock has 435 pieces and takes about 6 hours.
  • Batteries: are never included. For the wall clock, you'll need one AAA battery.

How does a clock kit work?

A wooden clock kit is made of laser-cut sheets: you pop the pieces out and fit them together. You build the case, the dial and the gears yourself. What turns the hands, though, you don't build: in our two real clocks, a ready-made movement comes in the box and you simply set it in place.

That's the difference many people only notice after buying. Some kits are real clocks; others show a dial as part of a scene. To understand how the gears in a wooden model actually move, read our article how a wooden mechanical model works.

Four illustrated cards for choosing a clock kit: a round wall clock with gears and rivets, an owl with a dial on its belly, a cuckoo clock with a roof and two weights, and a lit bookshelf with a clock, each with its situation and its kit
Which clock to build: four situations, four kits.

The infographic sorts the four kits by your situation. Three questions help you decide:

  • Should it tell time?: then look at the Steampunk Wall Clock and the Owl Pendulum Clock, both with the movement in the box.
  • How much time do you have?: from about 1.5 hours for the wall clock to about 6 hours for the cuckoo clock.
  • Where will it go?: on a wall, on a desk or between two rows of books.

If what you really want is the evening glow while you build, the Clockwork Library will suit you better. If you want to glance up and see whether you've missed the bus, pick one of the two real clocks.

4 wooden clocks to build yourself

With those questions in mind, here are the four kits, from the quickest to the longest. When a detail is missing, we'll tell you plainly.

1. The Steampunk Wall Clock: the quickest real clock

If you've never built anything and want a clock that actually runs at the end, this is the one. It's rated for beginners, and the illustrated step-by-step instructions in English walk you through every stage.

Steampunk Wall Clock in wood with an ornate dial and brass rivets

The Steampunk Wall Clock has 168 precut wooden pieces, a silent quartz movement with hands and date, brass rivets and adhesive hooks. About 1.5 hours to build, 33.5 cm tall.

The small assembly tools are in the box too. What's missing is one AAA battery. Once finished, the clock is very light and hangs on the included adhesive hooks or on a simple screw.

Contents of the Steampunk Wall Clock kit: four precut wooden sheets full of gears, a black quartz movement, hour and minute hands, a red second hand and the illustrated instructions

This is what's in the wall clock box: four sheets covered in gears, the movement, the three hands and the instructions. All you need to add is the battery.

2. The Owl Pendulum Clock: a clock that stands

Not everyone has a free wall. The owl stands on its own feet, on a desk, a nightstand or a shelf, and shows more than the time.

Owl Pendulum Clock in light wood with a dial on its belly

The Owl Pendulum Clock has a real dial with hands and a movement on its belly, and its two eyes are disks for the month and the day. 21 cm tall, rated for beginners.

The calendar isn't automatic: you turn the two eyes by hand, a small morning ritual. The piece count, build time and battery type aren't given for this kit. A drop of wood glue, not included, will hold a piece in place if needed.

3. The Cuckoo Clock: a project for several evenings

If you want to enjoy the build itself, not just the result, the cuckoo clock is the right pick. It's inspired by Black Forest clocks and takes far longer than the other two.

Wooden Cuckoo Clock kit inspired by Black Forest clocks

The Cuckoo Clock brings together 435 laser-cut wooden pieces that slot together. About 6 hours to build, 34 cm tall, intermediate level.

It runs on a USB-C cable or on batteries, not included. Wood glue is optional here. Spread the build over two or three evenings: with 435 pieces, your head stays clearer.

4. The Clockwork Library: the clock at the heart of a scene

Some people aren't looking for a wall clock at all, but for something that glows in the evening. The Clockwork Library is a book nook: a small scene that slides in between your books.

Clockwork Library book nook with two floors and a large clock at the back

The Clockwork Library shows a two-story library with an astronomical clock set into the back wall, floating books and a cat on the mezzanine. 370 pieces, 5 to 8 hours, warm LED.

The clock goes in last and becomes the vanishing point of the whole scene. No clock movement is listed in the box: it doesn't tell time, it tells a story. The light comes on with a touch switch.

The four kits compared

The key differences at a glance, so you don't have to open four product pages side by side.

KitPiecesBuild timeTells time?PowerHeight
Steampunk Wall Clock168about 1.5 hrsYes, with date1 AAA battery (not included)33.5 cm
Owl Pendulum Clocknot specifiednot specifiedYes, manual calendarnot specified21 cm
Cuckoo Clock435about 6 hrsClock, movement not describedUSB-C cable or batteries (not included)34 cm
Clockwork Library3705 to 8 hrsNo, decorative clockLED, touch switch25.5 cm

For the owl, neither the piece count nor the build time is given; it's rated for beginners, like the wall clock. You'll find more models among our wooden mechanical models.

Never built anything? Where to start

The table makes it clear: the gap between 1.5 and 6 hours is wide. For a first kit, that matters more than looks. The first time you pop pieces out of a sheet, your hands need a little while to learn how hard to press.

So here's our advice if you've never built anything: start with the Steampunk Wall Clock or the owl. Both are rated for beginners, and with the wall clock you'll see the hands move on the very first evening.

The cuckoo clock isn't a bad start, just a long one: 435 pieces call for patience. If you still pick it first, plan several evenings and read our beginner's guide to building a model beforehand.

Step by step: from the box to the wall

Wall clock or owl, the process is similar. Here are the three moments when it pays to slow down.

1. Sort before you pop pieces out

Diagram: a precut wooden sheet with piece outlines, a bowl of small pieces and a pair of tweezers, side by side on a wooden board

Don't pop out every piece at once. Take out only the pieces for the current step and put them in a small bowl. That way you won't mix up two gears that look almost identical.

Tweezers help with the smallest ones. To see which tools are really worth having, read our guide which tools you need to build a model.

2. Build the case around the movement

Diagram: a round dial, next to it a black quartz movement seen from behind with its brass shaft, and on the right three hands, with their names underneath

The movement sits behind the dial, and its shaft comes through the center at the front. Build the wooden layers in the order shown in the instructions, or the shaft won't fit through at the end.

The hands go on at the very end. If a piece wobbles, a drop of wood glue is enough. To pick the right one, read our article which glue to use on a wooden model.

A workshop tip: before fitting the hands, turn the movement so that the hour and minute hands both land exactly on 12. Press the hour hand on first, then the minute hand, without squeezing them together. That way they won't rub against each other, and your clock won't stop at a quarter past three.

3. Battery, time, hook

Diagram: an AAA battery, a dial being set to the right time and a white adhesive hook, side by side

Put the battery in before you hang the clock, and watch the second hand for a minute. If it's moving, set the time with the knob on the movement.

Only then hang it up. The Steampunk Wall Clock weighs very little: the adhesive hooks in the box are enough, and a screw works too. Remember, the AAA battery isn't included.

What if the clock is just part of the scene?

Not every clock in our catalog is meant to tell time. In some scenes, the dial is a backdrop that lights up in the evening.

Journey Through Time book nook with a red locomotive under a large clock

The Journey Through Time book nook shows the platform of an old train station, with a red locomotive under a large clock set in an arch. 258 pieces, 4 to 6 hours, touch LED powered by 2 AAA batteries, not included.

Illuminated Big Ben 3D wooden puzzle with its clock tower lit up

The Illuminated Big Ben is a 3D puzzle with 220 wooden pieces that fit together with no glue and no tools. An LED lights the clock tower, 19 cm tall, batteries not included.

Neither one tells time, and that's exactly their charm: the clock is part of the story. You'll find more scenes among our book nook kits and our 3D monument puzzles.

If it's the old-time charm that draws you to these clocks, our vintage gifts follow the same idea.

A clock kit also makes a meaningful 65th wedding anniversary gift.

Mistakes to avoid

  • Mistaking a decorative clock for a real one: check that a movement is listed in the box contents. That's not the case for the Clockwork Library.
  • Forgetting the battery: none of our kits include batteries. Keep an AAA battery handy for the wall clock before you start.
  • Fitting the hands too early: they bend easily while you're still working on the case. They go on last.
  • Popping out every piece at once: with gears that look alike, it's easy to lose track.
  • Rushing a long project into one evening: the cuckoo clock, at about 6 hours, is more enjoyable over several sessions.

Going further

Picking a clock kit comes down to one choice: a real clock like the Steampunk Wall Clock or the owl, a long project like the cuckoo clock, or a clock that belongs to a scene. All our models with moving parts are gathered in our mechanical models.

To discover all our kits, head over to our store.

MK

Mohamed El Manssouri Kebriti

Founder of Nooko. He chooses the kits in our catalog and writes the blog's guides, to help you find your scene and build it with confidence.